HI96730 Molybdenum Portable Photometer,0 to 40,0 mg/l

Product information "HI96730 Molybdenum Portable Photometer,0 to 40,0 mg/l"

CAL CHECK™
User calibration
Certified calibration and verification standards
BEPS (Battery Error Prevention System)
TIMER function
Auto shut-off
GLP Features


The HI 96730 measures the molybdenum content in water and wastewater. The meter uses an exclusive positive-locking system to ensure that the cuvette is in the same place every time it is placed into the measurement cell.

The cuvette has a very important role because it is an optical element and thus requires particular attention. It is important that both, the measurement and the calibration (zeroing) cuvettes, are optically identical to provide the same measurement conditions. Whenever possible use the same cuvette for both. It is necessary that the surface of the cuvette is clean and not scratched to avoid interference due to unwanted reflection and absorption of light. It is recommended not to touch the cuvette walls with hands.

Furthermore, in order to maintain the same conditions during the zeroing and the measuring phases, it is necessary to close the cuvette to prevent any contamination.





Order Information:
HI 96730 is supplied with sample cuvettes with caps (2), 9V battery and instruction manual


Specifications :
Range 0.0 to 40.0 mg/L
Resolution 0.1 mg/L
Accuracy ±0.3 mg/L ±5% of reading @ 25°C
Light Source Tungsten Lamp
Light Detection silicon photocell with narrow band interference filter @ 420 nm
Battery Type / Life 1 x 9V / approx. 40 hours of continuous use;
auto-off after 10 minutes of non use
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7")
Weight 360 g (12.7 oz.)
Method Adaptation of the mercaptacetic acid method