HI983304 EC Monitor up to 19.99 µS with LED-Alarm and Inline EC PRONTO

Product Code : HI983304

Category : DI Monitoring

Catalog : sorry not ready

Product information "HI983304 EC Monitor up to 19.99 µS with LED-Alarm and Inline EC PRONTO"

Water resistant
Continuous EC monitoring
Visual LED alarms



This water resistant conductivity meter is the result of customer requests for accurate, affordable process monitoring with low maintenance.

HI 983304-02 is supplied with a direct 2-pin probe and 2 m (6.6') cable with a ½" thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a ? of 2.4% per degree.

In the measurement mode, a red LED will alert the user in the event the reading is 1uS/cm over the setpoint. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. This meter can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 VDC power supply allows continuous monitoring over extended periods of time.



Order Information: HI 983304-02 (230V) is supplied with HI 7631/2 EC/TDS probe, calibration screwdriver, 12 VDC adapter and instructions.

Specification :
Range 0 to 19.90 µS/cm
Resolution 0.01 µS/cm
Accuracy ±2% F.S.
Calibration manual, 1 point through trimmer
Calibration Call us to know more
Temperature Compensation automatic, 5 to 50°C (41 to 122°F) with ß=2.4%/°C
Setpoint 1.00 to 5.00 µS/cm
Alarm red LED blinks when measured value differs from set point more than 1.00 µS/cm
Probe HI 7631/2 with 2 m (6.6') cable and ½" thread (included)
Power Supply 12 Vdc power adapter (included)
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 86 x 110 x 43 mm (3.4 x 4.3 x 1.7")
Weight 215 g (7.6 oz.)